Can't find the item you are looking for using the search and browse tools above?
Transport all types of bikes with Saris' Freedom Spare Tire 2-bike rack. Designed to fit all spare tires (left-, right-, or center-positioned), this innovative rack adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright… [more]
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames [more]
Thule's Gateway rack gets you on the road fast and worry-free. Thule's easy-to-use FitDial offers a perfect fit and quick installation on a huge variety of vehicles. Long arms provide clearance over spoilers, Hold Fast cradles with anti-sway cages protect your bike’s finish, while molded pads… [more]
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and… [more]
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part. [more]
Grab your bikes, put them on the back of your vehicle and go with Thule's Passage rear rack. It's that easy because Thule's innovative Fit Dial easily attaches the Passage to most vehicles and the 6 straps securely hold it in place (straps not shown), while Thule's rubber anti-sway cradles keep… [more]
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps. [more]
The Apex Swing Away rack carries up to four bikes safely and easily thanks to Thule's RDT cradles and No-Sway cages that hold fast and prevent bike-to-bike contact. Its higher mast and arced design give you greater ground clearance for peace of mind on bumpy roads. Plus, the arms fold down for… [more]
Saris’ Sentinel 3-Bike rack is ready to go right out of the box, easy to mount, and, thanks to its narrow arm spread, securely holds three bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the six hold-down… [more]
Thule's 2-Bike Parkway rack features 2 sturdy arms with Thule's stable, protective cradles to safely carry and secure your precious 2-wheel cargo. Plus, the Parkway easily tilts down for access to the back of your vehicle. [more]
Yakima's renowned ski carrier, the Powderhound, is easy to use and install. It's wide enough to carry up to four pairs of skis or two snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single button opens the Powderhound even… [more]
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install… [more]
Yakima's Locking BedHead keeps your bike locked and secure in your truck bed. This durable and corrosion-resistant mount quickly clamps (no drilling required) onto the interior lip of your truck bed's rail. The included SKS (Same Key System) cores and keys lock the bike and mount to the truck. A… [more]
Yakima's RailGrab Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory roof racks). The RailGrab Towers attach to your factory crossbars and they have die-cast components for a sturdy hold. [more]
Yakima's Control Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory track systems). The Control Towers attach to your factory track system with Yakima's vehicle-specific landing pads and they have die-cast components for a sturdy hold. [more]
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish [more]
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach… [more]
Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily by placing under hood or trunk and is secured by the closed lid - Boat bow & stern tie-down loops that are fastened inside the vehicle hood or trunk hatch and… [more]
You'll have enough room for everyone with Yakima's FatCat on your roof. Featuring a low aerodynamic profile that reduces wind noise, it's wide enough to carry up to 6 pairs of skis or 4 snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for… [more]
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks… [more]
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. [more]
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested… [more]
Super rugged platform carrier with frame free clamping security for all types of bikes. - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Secure bikes quickly without frame contact with the frame free ratcheting arm - Bike to bike… [more]
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions:… [more]
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use. [more]
Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use. [more]
Get your hands on Yakima's FullTilt 5, a premium tilt-down hitch rack that comes fully assembled out of the box. Installation is a breeze with the AutoPin and locking SpeedKnob. ZipStrips make loading and securing bikes simple. Need access to the rear of your vehicle? Just tilt the rack down with… [more]
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk… [more]
Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior… [more]